Fiberglass Orthopedic Casting Tape

 7.5x360 cm Orthopedic Casting Tape providing stretchability which comprises a knitted fibrous substrate impregnated with a water-curable synthetic resin wherein the substrate consists of synthetic organic fiber stretch yarn solely, in part stretch yarn and in part natural fibers, in part stretch yarn and in part artificial fibers or in part stretch yarn and in part mixtures of natural and artificial fibers. 7.5x360cm Orthopedic Casting Tape is made from fiberglass material used to replace plaster of paris bandage with the outstanding advantages.

 The Alto U-Pad is the second layer of the cast application. The cast is an orthopedic device that helps immobilize the injured limb until it fully heals. It is an essential item to have under any cast. It is designed to help provide cushioning under the cast and relieve chafing. It is constructed of 100% cotton, helps to absorb exudate, ensures patient comfort. Alto U-Pad conforms well to any contour and is helps to keep the skin dry and comfortable

We have been a prestigious supplier of Synthetic Orthopedic Casting Tape in the market. It is used to repair a leg or arm cast, and to make splints, which restrict bone movement while the injury recovers. Synthetic Orthopedic Casting Tape is a multi-layered bandage used to prevent broken or injured bones from moving so that they can  heal correctly

Our products are ISO, CE FDA approved. The Orthopedic Synthetic Cast Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin.

Advantages:

• Light Weight
• High strength
• Fast solidification
• Excellent X-ray radiolucency
• Good air-permeability
• Comfort
• Convenient operation compared with traditional plaster bandage

Application instruction:

• Apply 1-2 layers stockinet over the affected part and additional padding can be used
• Wear surgical gloves
• Before opening the bag, choose the proper size
• Immerse the cast in room temperature water (20-25OC) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is
• Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position
• If more rolls of cast are used at one time, make sure the good adhesiveness of each cast
• Smooth and rub the surface to achieve good adhesiveness between layers. The cast start solidifying in 3-5 minutes after immersion in the water. So operation should be finished in 3-5 minutes. Patients can move the affected part in the 10 minutes before sufficient cure
• The cast may be windowed, trimmed or removed with electric plaster saw

Precautions:

• Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
• Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
• The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
• It should be operated by a doctor or a medical professional
• The date of production is marked on the bag. The period of validity of products three years

Our products are ISO CE  FDA approved. The Orthopedic Synthetic Cast Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin.

Advantages:

• Light Weight
• High strength
• Fast solidification
• Excellent X-ray radiolucency
• Good air-permeability
• Comfort
• Convenient operation compared with traditional plaster bandage

Application instruction:

• Apply 1-2 layers stockinet over the affected part and additional padding can be used
• Wear surgical gloves
• Before opening the bag, choose the proper size
• Immerse the cast in room temperature water (20-25degree C) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is
• Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position
• If more rolls of cast are used at one time, make sure the good adhesiveness of each cast
• Smooth and rub the surface to achieve good adhesiveness between layers. The cast start solidifying in 3-5 minutes after immersion in the water. So operation should be finished in 3-5 minutes. Patients cant move the affected part in the 10 minutes before sufficient cure
• The cast may be windowed, trimmed or removed with electric plaster saw

Precautions:

• Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
• Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
• The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30degree C and humidity should be less than Rh 60%
• It should be operated by a doctor or a medical professional
• The date of production is marked on the bag. The period of validity of products three years

 7.5x360 cm Orthopedic Casting Tape providing stretchability which comprises a knitted fibrous substrate impregnated with a water-curable synthetic resin wherein the substrate consists of synthetic organic fiber stretch yarn solely, in part stretch yarn and in part natural fibers, in part stretch yarn and in part artificial fibers or in part stretch yarn and in part mixtures of natural and artificial fibers. 7.5x360cm Orthopedic Casting Tape is made from fiberglass material used to replace plaster of paris bandage with the outstanding advantages.

ALTOCAST is a synthetic orthopaedic casting tape made of knitted fiberglass or polyester substrate impregnated with water-activating polyurethane resin. The fabric is extensible in all directions. which makes it very comfortable in use.

Exposure to any moisture will cause the tape to become rigid. the setting time is approximately 4 minutes and it takes 20 minutes for full weight bearing.

Smooth Finish

high quality knitted substrate and special resin formula provide smooth surface and strong layer adhesion.

Superb and Distingushed Color

Excellent Moulding

Superior multi-direction stretch gives excellent moulding on curved area.

Precautions:

• Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
• Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
• The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
• It should be operated by a doctor or a medical professional
• The date of production is marked on the bag. The period of validity of products three years

ALTOCAST is a synthetic orthopaedic casting tape made of knitted fiberglass or polyester substrate impregnated with water-activating polyurethane resin. The fabric is extensible in all directions. which makes it very comfortable in use.

Exposure to any moisture will cause the tape to become rigid. the setting time is approximately 4 minutes and it takes 20 minutes for full weight bearing.

Smooth Finish

high quality knitted substrate and special resin formula provide smooth surface and strong layer adhesion.

Superb and Distingushed Color

Excellent Moulding

Superior multi-direction stretch gives excellent moulding on curved area.

Precautions:

• Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
• Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
• The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
• It should be operated by a doctor or a medical professional
• The date of production is marked on the bag. The period of validity of products three years